Slicer Discord
BONSAI TREE – 3D printable model from MakerWorld MakerWorld
2D Art

BONSAI TREE

23 Downloads
27 Likes
7 Makes
Go to Model
BONSAI TREEProject: bonsai blue.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.4mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.48mm) swap to Blue At layer #15 (0.72mm) swap to Beige At layer #47 (2mm) swap to Jade White for the rest.
Category
2D Art
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
150 mm (Medium)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection