Thingiverse
Bonsai3D modified
von Bezginbekir
1
Downloads
0
Likes
0
Makes
Watch it on youtube with song APT from Rose :
https://youtube.com/shorts/Ar3_j8mbHzE
Details are in my blog :
https://erolcum.blogspot.com/2024/12/bonsai3d-yazc.html
(you may translate my blog to your lang. by using widget in the menu)
I modified the original Bonsai printer parts to print it more easily without supports. I used E3D V6 as hotend. X axis is completely changed and simplified, it is from Prusa i3. For the Z axis movement, I used two M5 screws instead of the trapezoidal screw. I used a 6mm air hose as a coupling in the Z axis motors. I used the hose not because it was cheap but because it worked better than couplings. I bought the LCD screen holder and the part carrying the cards from my old friend Reprap Funbot. You may use insert or normal M5 nuts for the z movement, then use the related part. If your x axis rods move freely, then you can use some masking tape to fix them in the plastic part. You may visit my blog to see the other details.
https://youtube.com/shorts/Ar3_j8mbHzE
Details are in my blog :
https://erolcum.blogspot.com/2024/12/bonsai3d-yazc.html
(you may translate my blog to your lang. by using widget in the menu)
I modified the original Bonsai printer parts to print it more easily without supports. I used E3D V6 as hotend. X axis is completely changed and simplified, it is from Prusa i3. For the Z axis movement, I used two M5 screws instead of the trapezoidal screw. I used a 6mm air hose as a coupling in the Z axis motors. I used the hose not because it was cheap but because it worked better than couplings. I bought the LCD screen holder and the part carrying the cards from my old friend Reprap Funbot. You may use insert or normal M5 nuts for the z movement, then use the related part. If your x axis rods move freely, then you can use some masking tape to fix them in the plastic part. You may visit my blog to see the other details.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!