Thingiverse
Book Stand
von codebeans
280
Downloads
262
Likes
3
Makes
This is a book stand/tablet stand.
**Specs:**
Hinge Angles are ~10/20/30/45 deg and fit a regular A4 spiral-bound notepad without tipping over.
The holes are all 5mm in diameter so they fit a standard M5 bolt. Alternatively you can print the bolts.
**Print:**
1x bookstand_base
2x bookstand_connector
2x bookstand_hinge
2x bolt_a (optional)
1x bolt_b (optional)
standard PLA
10% infill
0.2mm resolution
**Specs:**
Hinge Angles are ~10/20/30/45 deg and fit a regular A4 spiral-bound notepad without tipping over.
The holes are all 5mm in diameter so they fit a standard M5 bolt. Alternatively you can print the bolts.
**Print:**
1x bookstand_base
2x bookstand_connector
2x bookstand_hinge
2x bolt_a (optional)
1x bolt_b (optional)
standard PLA
10% infill
0.2mm resolution
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
