Bookmark, Butterfly

MembershipLooking to sell physical prints of this model? You can easily obtain a commercial license right here by joining my membership tier. This 3Mf was done on a Cool Plate. If you are using a different plate, make sure you change to the plate you're using. You do not need an AMS to change colours. At the layer where you should change colour, change to pause and manually change the colour when the print pauses. Bookmarks need a clean plate to avoid any corners rising. Project: butterfly 2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50.82x152.46mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 1.3mm and the Actual Depth is 1.4mm Filaments Used: PLA Generic Black PLA JustMaker Pro Matte Turquoise PLA Polylite White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Turquoise At layer #12 (1.04mm) swap to White for the rest.