Bookmark Chimpanzee

In the print project, the negative part is inserted. If you dont want a hole in the bookmark, remove it before the print. Model is size 50x150mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Nozzle: 0.4 You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.9mm and the Actual Depth is 1.9mm These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA Bambulab Basic Brown Transmission Distance: 2PLA Elegoo + White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Blue GrayAt layer #8 (0.72mm) swap to BrownAt layer #9 (0.8mm) swap to White for the rest.