Bookmark - Cute Kawaii Turtle

Here is: Bookmark with a Cute Kawaii Turtle.The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too.Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 52.67x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.48mm) swap to BambuLab Green At layer #11 (0.56mm) swap to White At layer #25 (1.12mm) swap to Black At layer #27 (1.2mm) swap to BambuLab Green At layer #31 (1.36mm) swap to Yellow At layer #41 (1.76mm) swap to White for the rest. ↓ Ps. If you like my work you can always hit ↓Boost Me:)