Bookmark Japan Inspired

The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too.Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mmThe Model is 52.67x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.88mm) swap to White At layer #12 (1.48mm) swap to Red for the rest.Boost MeIf you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊