MakerWorld
Hueforge & Lithophane
Vai al Modello
Bookmark - Kawaii Panda
66
Download
80
Likes
36
Makes
The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 52.67x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 1.9mm and the Actual Depth is 1.9mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4This print uses 3 unique filamentsSwap Instructions:Start with Black At layer #9 (0.8mm) swap to White At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to White for the rest.↓ Ps. If you like my work you can always hit ↓Boost Me:)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
