MakerWorld
Hueforge & Lithophane
Model downloaden
Bookmark - Puppy Dog
50
Downloads
61
Likes
23
Makes
Here is: Bookmark with a Cute Puppy Dog.The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 52.67x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 1.9mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 4.1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #5 (0.48mm) swap to Ice Blue At layer #9 (0.8mm) swap to White At layer #12 (1.04mm) swap to Black At layer #14 (1.2mm) swap to Orange At layer #20 (1.68mm) swap to White for the rest. ↓ Ps. If you like my work you can always hit ↓Boost Me:)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
