Bookmark Stitch

❤️ ENJOYED THIS PROJECT? ❤️ There’s plenty more where this came from! From HueForge artwork and bookmarks to lithophanes and custom 3D printing projects, I'm constantly adding new designs. 🔗 Explore all my projects HERE Follow my profile so you don't miss future releases! 🚀 🎨 HUEFORGE INFO🎨 🎯 Ready-to-print 3MF included All settings are already configured. Just slice and print. 🌈 FILAMENT COLORS USED #000000 PLA Anycubic Black Transmission Distance: 0.1 #003594 PLA Anycubic Blue Transmission Distance: 2.6 #5dd4ff PLA Anycubic Cyan Transmission Distance: 1.9 #ffffff PLA Anycubic White Warm Transmission Distance: 6.2 #ff8da1 PLA Anycubic Pink Transmission Distance: 5.2 #c8112e PLA Anycubic Red Transmission Distance: 3.6 This print uses 6 unique filaments ⚠️ PRINT SETUP INFORMATION ⚠️ The included .3mf file contains two build plates, both already configured with the correct color assignments, filament changes, and print settings. 🔹 Plate 1 is designed for users with two ACE units (or any setup capable of handling at least 6 colors simultaneously). 🔹 Plate 2 is designed for users with a single ACE unit (or any setup capable of handling at least 4 colors). 🔄 COLOR SWAP LAYERS Swap Instructions for 2 ace or sistem with 6 color at least (Plate 1) Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Cyan At layer #13 (1.12mm) swap to White Warm At layer #17 (1.44mm) swap to Pink At layer #19 (1.6mm) swap to Red for the rest. Swap Instructions for 1 ace or sistem with 4 color at least (Plate 2) Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Cyan At layer #11 (0.96) Pause - Change black with Red, Blue with Pink At layer #13 (1.12mm) swap to White Warm At layer #17 (1.44mm) swap to Pink At layer #19 (1.6mm) swap to Red for the rest. ⚠️ IMPORTANT⚠️ • You can resize X/Y freely • ❗ DO NOT change Z height 👉 If you scale the model, restore the original Z height otherwise color transitions will be incorrect.