Bookmark Witchwatch Nico

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail vennez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #ce2406 PLA Forshape red Transmission Distance: 5.3 #c3aca3 PLA Sunlu beige Transmission Distance: 6.7 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Instructions de changements: Commencer par Black At layer #10 (0.88mm) swap to red At layer #17 (1.44mm) swap to beige At layer #23 (1.92mm) swap to Jade White pour le reste.