Slicer Discord
Bookmarks dog set 2  – 3D-printbaar model van MakerWorld MakerWorld
2D Art

Bookmarks dog set 2

140 Downloads
110 Likes
72 Makes
Model downloaden
second set 4 dog bookmarks, print all 4 or choose the ones you like the most. You can print them with or without holes Project: bookmarks dog set 2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 53.33x159.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil marron Transmission Distance: 5 PLA Overture Light Gray Transmission Distance: 0.7 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #11 (0.96mm) swap to marron At layer #16 (1.36mm) swap to Light Gray At layer #18 (1.52mm) swap to White for the rest.
Categorie
2D Art
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Mysstra3Dart publiceert ook op

283 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie