Thingiverse
BOR 90 Inspired Trimaran
door Tunabarrage
955
Downloads
806
Likes
3
Makes
#CatchTheWind update
Wingsail parts are done, however due to some complications recently I didn't have a chance to work on the attachment and camber translation mechanisms yet. They will be uploaded later. As it stands, using a short nail glued to the top of the deck that sits in a small hole drilled into the leading edge bottom part, along with properly tensioned rigging going to the rigging mounts on the hulls will allow rotation and let the boat sail.
To assemble the wing, use epoxy or super glue or acetone weld the parts together. The leading edges should be combined first, followed by the trailing edges to the leading edges. attach the bottom part of the wing together using an m3 screw with a washer between the printed parts. Use standard 1.75mm filament as connection for the top two flaps. Once all assembly is complete, use vinyl wrap or shrink wrap or similar to 'skin' the wing.
**Inspiration:**
The BOR90, or USA 17, as Team Oracle like to call it, was a maste
Wingsail parts are done, however due to some complications recently I didn't have a chance to work on the attachment and camber translation mechanisms yet. They will be uploaded later. As it stands, using a short nail glued to the top of the deck that sits in a small hole drilled into the leading edge bottom part, along with properly tensioned rigging going to the rigging mounts on the hulls will allow rotation and let the boat sail.
To assemble the wing, use epoxy or super glue or acetone weld the parts together. The leading edges should be combined first, followed by the trailing edges to the leading edges. attach the bottom part of the wing together using an m3 screw with a washer between the printed parts. Use standard 1.75mm filament as connection for the top two flaps. Once all assembly is complete, use vinyl wrap or shrink wrap or similar to 'skin' the wing.
**Inspiration:**
The BOR90, or USA 17, as Team Oracle like to call it, was a maste
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!