Thingiverse
Borescope Endoscope Camera Guide
por JaronLindow
7
Descargas
6
Likes
0
Makes
Made for use with an 8mm borescope camera
Requires:
1 m3*10 bolt
1 m3 nut
4 8x22x7mm 608-2RS bearings ($20/100 on Amazon)
Designed to fit in a 1 1/2" inch schedule 40 PVC pipe with about 1mm of clearance
If you skip printing the hemispheric wheels and just print the main body and attach the bearings, this should fit inside a 1 1/4" schedule 40 PVC pipe, which PVCFittingsOnline shows as having an average internal diameter of 1.360"
Requires:
1 m3*10 bolt
1 m3 nut
4 8x22x7mm 608-2RS bearings ($20/100 on Amazon)
Designed to fit in a 1 1/2" inch schedule 40 PVC pipe with about 1mm of clearance
If you skip printing the hemispheric wheels and just print the main body and attach the bearings, this should fit inside a 1 1/4" schedule 40 PVC pipe, which PVCFittingsOnline shows as having an average internal diameter of 1.360"
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
