Born From Fire Hueforge Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 57.14x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.3mm and the Actual Depth is 2.2mmFilaments Used: PLA HS-SUNLU(s) BLACK Transmission Distance: 0.1 PLA HS-SUNLU(s) RED Transmission Distance: 4 PLA HS-SUNLU(s) ORANGE Transmission Distance: 5.4 PLA SUNLUU YELLOW Transmission Distance: 4.5This print uses 4 unique filamentsSwap Instructions: Start with BLACK At layer #14 (1.2mm) swap to RED At layer #18 (1.52mm) swap to ORANGE At layer #23 (1.92mm) swap to YELLOW for the rest.