Bottle rack

I wanted to challenge myself to design a water bottle rack that could hold 12 water bottles and also be printed/assembled in less than 1 day.Note: pictured 32oz Nalgene only fits on top row Non-Printed Partsfor each bottle x2 - 5/16" (8mm) wood dowels cut to 7.5" (190mm)UPDATE: there are now remixes for printed dowels if thats your jam. Print SettingsI suggest printing a couple of the smaller top models to test tolerances/fit before full send. The parts off my printer fit fairly tight and took some force to assemble.*Stacked print settings*Layer Height: 0.2mm (required for stacked model stls)Perimeters: 2 is sufficient for structureInfill: 10-15%Bottom shell layers: 4Ironing: (Optional) All top surfacesExample of sliced plate printing in 10hrs for 12 bottles (no ironing)AssemblyAssemble both printed part sidesAttach cut dowels to one sideSet the dowel side on a flat surface with dowels facing upInstall the other side - place second assembled side on top aligning the dowels and