Bowden Collet Rev 2.0

Here is a E3D V6 Bowden Collet I designed because of my issue with the Orion Delta when I first bought it used, Mine was melted and I needed to replace. This will have to be printed at .05 - .1 Micron in order to print it. I would use either ABS or PETG as they are more flexible than PLA. Print with a brim only if you are having adhesion issues otherwise print as it is.

This is a temporary fix until you can get a real one. It will be a tight fit for the tube but the first time you take it out it may snap.

What you will need to print this is a 0.2 Nozzle and your favorite PLA, That's it.