Box for END-CNC´s MQL pump controller

Designed this box for the Pump controller from END-CNC´s MQL System.

Slide the Cables through the glands (M20 for I/O from machine controller / M12 for two solenoids and the stepper) and wire it to the Board.
The two boards just slide in, lid is attached, Potentiometers are secured with the nuts and knobs are pressed on.

You also need:

4x Ruthex thread Insert M4x8,1
4x Socket Head cap screw M4x12mm
3x Lapp Skintop M12x1,5 cable gland with Nut
1x Lapp Skintop M20x1,5 cable gland with Nut


.f3d and .step of an assembly attached for easy modifing.


+added a bracket to mount the Box somewhere with two M5 Socket Head cap screws.