Box for LambuLab

IntroductionWhen I bought Bambu products, the original factory gave me a lot of accessories, I was very happy and worried about how I should store so many accessories, so I decided to print a storage box for Bambu original accessories, and I also added the position for placing the blade and glue in it. The storage requirements of the storage box basically met 90% of the users.Required ComponentsM5 ruthex (M5x4x7) inserts x 10M5x20 screws x 8M5x28 screws x 210x1mm circular magnet x 4AssemblyIn order to facilitate the purchase of accessories, so I unified the use of M5 screws and nuts. 8 nuts are used to fix the wings and 2 nuts are used to flip. At the same time, I also used 4 round magnets. When installing magnets, glue is needed. At the same time, pay attention to marking the front and back of magnets. If it is fixed and found to be installed in the opposite direction, it will be a huge trouble to remove them later. So be sure to check both sides of the magnet before fixing the glue.A