Box for Lolin ESP32 with OLED

This is part of a bigger project but I thought the case may be of use to anyone who might want to build something using the Lolin ESP32 Oled board.

The board mounts with 2mm screws self tapping to bottom of the box. The mounting back
is secured using self tapping 3mm screws.

I have a 1/4 inch hole on one end for a switch and the other is open to connect a micro usb cable.

I needed a switch to Tare my readings so I experimented with a recessed 6mm square hole for a 6mm Tactile push button switch. Just push the leads through the front and solder the leads on the inside which keeps the switch in position.

Hope someone finds it useful .

Cheers
Kisssys