Thingiverse
bq Hephestos 2 Spool Holder
door Deejey
5
Downloads
4
Likes
0
Makes
Hi !
This is a spool holder for the BQ Hephestos 2.
But you can make it for another 3D printer...
You need to print one time the 11 *.obj files , except the number 04 ( x2 ) and the 07 ( x6, if you want to have 3 spools ) ( this part 07 is for BQ spool ).
You need too :
- 5 Aluminium Tube ( 12x1 mm x 1 meter ).
- 5 Aluminium Tube ( 8x1 mm x 1 meter ).
- 2 Aluminium Tube ( 6x1 mm x 1 meter ).
- 40 bolts ( M3 x 10mm ) ( look at the pics ).
- 16 bolts and nuts ( M3 x 16mm ) ( look at the pics ).
- 12 screws ( M3 x 12mm ) ( to fix the holder on a desk or a board, with the part 01 ).
- 2 or 4 springs ( from a 1/10 model car, for example ) ( look at the pics ).
- a power drill ( borer @2.5mm to drill the aluminium tubes and the desk.
I uploaded the original *.blend file, so you can see the measures for the aluminium tubes.
If you have any questions, tell me !
Best regards,
Jérémie.
This is a spool holder for the BQ Hephestos 2.
But you can make it for another 3D printer...
You need to print one time the 11 *.obj files , except the number 04 ( x2 ) and the 07 ( x6, if you want to have 3 spools ) ( this part 07 is for BQ spool ).
You need too :
- 5 Aluminium Tube ( 12x1 mm x 1 meter ).
- 5 Aluminium Tube ( 8x1 mm x 1 meter ).
- 2 Aluminium Tube ( 6x1 mm x 1 meter ).
- 40 bolts ( M3 x 10mm ) ( look at the pics ).
- 16 bolts and nuts ( M3 x 16mm ) ( look at the pics ).
- 12 screws ( M3 x 12mm ) ( to fix the holder on a desk or a board, with the part 01 ).
- 2 or 4 springs ( from a 1/10 model car, for example ) ( look at the pics ).
- a power drill ( borer @2.5mm to drill the aluminium tubes and the desk.
I uploaded the original *.blend file, so you can see the measures for the aluminium tubes.
If you have any questions, tell me !
Best regards,
Jérémie.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
