Brace For E10+ Z Axis

So I did notice a big issue with the Z axis extrusion not being secured. I tried some other perpendicular brace but this was not good at all. So I made my own to work with this mod. The notches that go into the channels are very tight so you might want to scale it down a hair; I just used my old x-axis extrusion to wear it down a bit. Also you probably dont need all the holes just 3 is probably good enough with how tight the notches are, but they are there if you want more assurance that they will hold. I have a very thick bed with some heat transfer silicone material in between my heated bed and glass sheet and it doesnt get close to making contact, YMMV. Made to use M3 tnuts and bolts/screws, you also need to make a mirrored version for the other side this is for the right side.