Thingiverse

Bracket for Battery Connector

door dsmith1960

13 Downloads

8 Likes

0 Makes

This Bracket is for mounting the Battery Disconnect Holder (https://www.thingiverse.com/thing:5180683) to the front chassis mount on my Jeep JK Wrangler. I used a #10-24 x 1/2" long Flat Head Screw, and blue thread locker, to fasten the bracket to the stock mounting bracket on the chassis near the front bumper. The Battery Disconnect Holder is mounted to this bracket using four #8-32 x 5/8" long Button Head Socket Cap Screws and four #8-32 NyLok nuts. (Other suitable machine screw hardware will work too.)

The wiring is 8 AWG from a set of Jumper Cables.

I filed two notches in the Battery Disconnect Holder to accommodate the lanyard of the cover for the battery terminals.

air compressor angle bracket battery bracket bumper chassis mount connector disconnect Jeep JK jeep wrangler mounting bracket wench wiring air compressor angle bracket battery bracket bumper chassis mount connector disconnect Jeep JK jeep wrangler mounting bracket wench wiring

Bron

Thingiverse

Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid

Eendelig Hardware nodig

Supports 1/3

Montage 0/3

Instellingen 1/3

Bedgrootte 0/3

Nabewerking 1/3

Printer

FDM / FFF

Bestandsformaat

STL

Materiaal

Nabewerking

Hardware

Software

Cura, PrusaSlicer of vergelijkbaar

Nog geen beoordelingen

Nog geen reacties – wees de eerste!

Bracket for Battery Connector

Toevoegen aan collectie