Thingiverse
Tools
Voir le modèle
Brass Marker
294
Téléchargements
159
Likes
5
Makes
Jig to mark your brass to easily find it at the range or during competition.
Only needs supports for the overhanging hinge pieces. The holes print just fine without any support.
YM
For the hinge I used some 6mm carbon rod. the holes are just undersized. I drilled the part which holds the markers with a size "B" drill bit and the other piece with a size "C" drill bit. it allows enough friction to hold together but allows the part to move freely. YMMV.
Only needs supports for the overhanging hinge pieces. The holes print just fine without any support.
YM
For the hinge I used some 6mm carbon rod. the holes are just undersized. I drilled the part which holds the markers with a size "B" drill bit and the other piece with a size "C" drill bit. it allows enough friction to hold together but allows the part to move freely. YMMV.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
