BREWTOOLS Screen Cage - Vesa

A slimline cage for the Brewtools touchscreen. Honeycomb pattern for good ventilation. Vesa hole pattern on the back piece for Vesa 75_75 and Vesa 100_100. You also need 16 pcs m5 threaded inserts for 3d prints (6,3mm OD), 4 pcs m5 12mm bolts, 12 pcs m5 20mm bolts, 4pcs m4 25mm bolts. You also need the m5 bolts (+ nuts) with a length of your choice to fasten the cage onto the Vesa plate (4 sets)

No. of prints for a full cage:

Front: 1 pcs
Back: 1 pcs
Top/Bottom: 2 pcs
Side: 2 pcs

The top/bottom piece is press fit and should be glued in place (2 part epoxy).

The Brewtools logo on the Top/bottom piece can be split into parts in your slicer (if supported) in order to choose a different color for the logo as per the pictures.

See the attached pictures to reference where to place inserts etc..