Brewzilla 35l - sparge tool

Work in progress only.

An attachment for the Kegland Brewzilla 4.1 - 35 litre version
I had a few problems with the top plate / screen so I made these parts to help keep the mash from being compacted.
The parts connect to the lid and hold up the plate, they redirect the wort / water across the area of the plate so that it rains more evenly down onto the mash.

Parts should be printed in PETG.

Additional hardware required:
- Flexible pipe for connecting the Brewzilla's 1/2 Inch Type F Camlock fitting to a 1/2 inch BSP connected, I bought a flexible metal version from Kegland - picture included
- 1/2 Inch Type F Camlock - Male Cam x Male BSPT Thread - picture included
- 4 x M6x10 stainless steel bolts (thread pitch 1.0 - standard M6 bolts)

Note for the threads I used a small angled / needle type file to open up the threads and then work them back and forth a few times to ensure smooth movement, it can take a while but it works fine.

This is an early version and at present it is only