MakerWorld

Characters

Brick Monkey - Classic - 500%

von LayerForge Studios · Characters

37 Downloads

40 Likes

30 Makes

Bring your childhood to life with my custom Giant Brick Monkey! This model was cut for best printing on standard FDM 3D printers. ⚠Disclaimer This is a fan-made, original 3D model inspired by Danish Plastic Brick Manufacturer Company® Not affiliated with or endorsed by Danish Plastic Brick Manufacturer Company® or DISNEY® & LUCASFILM LTD® Star Wars® Or Bethesda Softworks® 3D printing settings USE PRINT PROFILE Basic Print Settings-Advanced in .3MF Sunlu PLA + 2.0 .2mm layer height, 5% Gyroid infill, Organic Tree supports enabled, support Z Top distance set to .12 Extruder Temp 210c Bed Temp 45c No Brim on Biqu Cryogrip Glacier Printed on BambuLab P1S With AMS 2 PRO Designed for the shrinking rates of Sunlu PLA + 2.0 Parts may need to be scaled up or down by 1% depending on how well maintained, clean & tuned your printer is.

monkey brick star wars wasteland fallout bricks building construction diy easy print in place NO AMS single single color simple gorilla miniature mega large big

Kategorie

Characters

Quelle

MakerWorld

Veröffentlicht

29.03.2026

Aktualisiert

13.07.2026

Was du zum Drucken brauchst: Anfänger Mittlere Konfidenz

Warum?

Print-in-place-Design · keine Supports · 2 Farben · 0.20mm Schichten

Ohne Supports Print-in-place 2 Farben / AMS

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA

Farben

2 (AMS/MMU empfohlen)

Schichthöhe

0.2 mm

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Brick Monkey - Classic - 500%

Ähnliche Modelle

Zur Sammlung hinzufügen