Thingiverse
Bridge Rectifier
di Alerat
3
Download
1
Likes
0
Makes
This Thing is a bridge rectifier and is intended to be printed using LCD/DLP resin printer.
The concept is to encapsulate electronic components into a hard 3D printed shell, closed with the same resin for a seemless design.
This Thing comes in two sizes.
- One suitable with Diode 2CLG30KV_20mA.
- Other suitable with Diode VG12_22.
Each requires four screws Hexa M4_16mm and matching nuts for connection.
Made with Anycubic Transparent resin and used at 20KV without problem.
The concept is to encapsulate electronic components into a hard 3D printed shell, closed with the same resin for a seemless design.
This Thing comes in two sizes.
- One suitable with Diode 2CLG30KV_20mA.
- Other suitable with Diode VG12_22.
Each requires four screws Hexa M4_16mm and matching nuts for connection.
Made with Anycubic Transparent resin and used at 20KV without problem.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
