Thingiverse
Models
Model downloaden
Brier Island Lighthouse
337
Downloads
312
Likes
1
Makes
This Lighthouse is based in the https://www.thingiverse.com/thing:2687021 model (Thanks for Sharing!)
I cut the original model so it can be printed in different colors and used it as a Tinkercad exercise.
The total print time was around 18 hours, in my case by file:
Building Base: 10 hs.
Building Top: 2 hs.
Light: 0.5 hs.
Door: 0.5 hs.
Fence: 1 hs.
Roof: 2.25 hs.
Platform: 1 hs.
Color switch can be added to the Gcode file at the height you wish, in my model I used:
Building Base:
46.4
79.2
110.2
141.2
Building Top:
29.00
Note that this model color height does not honor original Light House. For reference please see: https://upload.wikimedia.org/wikipedia/commons/2/2c/Brier_Island_Lighthouse_%281%29.jpg
Some parts have guides to enable a better reference positioning; some to be glued & some to fit by pressure.
Hollow structure allows for a lamp placement and hopefully a rotating mechanism with a mirror.
Next steps a
I cut the original model so it can be printed in different colors and used it as a Tinkercad exercise.
The total print time was around 18 hours, in my case by file:
Building Base: 10 hs.
Building Top: 2 hs.
Light: 0.5 hs.
Door: 0.5 hs.
Fence: 1 hs.
Roof: 2.25 hs.
Platform: 1 hs.
Color switch can be added to the Gcode file at the height you wish, in my model I used:
Building Base:
46.4
79.2
110.2
141.2
Building Top:
29.00
Note that this model color height does not honor original Light House. For reference please see: https://upload.wikimedia.org/wikipedia/commons/2/2c/Brier_Island_Lighthouse_%281%29.jpg
Some parts have guides to enable a better reference positioning; some to be glued & some to fit by pressure.
Hollow structure allows for a lamp placement and hopefully a rotating mechanism with a mirror.
Next steps a
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
