Brightroom separator (sterilite)

(work-in-progress) Spelling too.

Normally, removing the lid from a Sterilite 3-drawer cart requires nothing more than a pry-stick and some muscle. The variation from target's brightroom line are a little more difficult. I needed to press the lock in past the retainer in the lid to separate the lid from the drawer body. This peg-system was tested with an Irwin 6-inch quick-grip model 00546. Any 6-inch clamp will work as long as it can apply 63 kg / 140 lbs of Clamping Force. The squeezing surface should not be any wider than 20.50 mm with the protective covers removed.

The triangular piece provides purchase for use on the front legs.

See the pictures for use.
0. Place the drawer set upside-down on a flat surface and remove the protective covers from the squeeze clamp.
Start on any rear leg.
1. Place the base a few mm or 1/2 inch away from lock assembly.
2. Place the peg on the base with the narrow side facing the lock.
3. Place a squeeze clamp on the peg and flat ma