Brown Bear HueForge

Brown BearThe original image is taken from https://vk.com/fotochpuPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 141.39x200mm in size. You can adjust the dimensions along the X and Y axes proportionally, but do not change the height of the model (Z axis).You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #18 (0.84mm) swap to Blue Gray At layer #28 (1.24mm) swap to Grey At layer #42 (1.8mm) swap to White for the rest.