Bruce Lee hueforge

Project: bruce lee.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.97x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil White Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with negro At layer #12 (1.04mm) swap to White At layer #15 (1.28mm) swap to negro At layer #17 (1.44mm) swap to Orange At layer #22 (1.84mm) swap to Yellow At layer #25 (2.08mm) swap to White for the rest