Household/Home Decor
Go to Model
BRUCE LEE HUEFORGE
250
Downloads
52
Likes
0
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.09x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA smartfil dark grey Transmission Distance: 0.8PLA smatfil amarillo Transmission Distance: 5.8PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to dark greyAt layer #13 (1.12mm) swap to amarilloAt layer #20 (1.68mm) swap to Jade White for the rest.
Joagmo also publishes on
104 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!