MakerWorld
2D Art
Zum Modell
Bruce Lee hueforge
64
Downloads
48
Likes
36
Makes
Project: bruce lee.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 132.97x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil White Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #12 (1.04mm) swap to White At layer #15 (1.28mm) swap to negro At layer #17 (1.44mm) swap to Orange At layer #22 (1.84mm) swap to Yellow At layer #25 (2.08mm) swap to White for the rest.
Mysstra3Dart veröffentlicht auch auf
283 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!