Bruk Bottle

Upload Bruk.gcode on the SD card and launch it from the printer interface. Find Bruk.gcode inside “Bruk print files.zip” folder (download) Apply standard plastic adhesive tape (commonly made of PP) to the bed to ensure adhesion. Bruk.gcode is compatible with all Bambulab printers (preferably use 0.6 nozzle), and with all printers with at least 130x130x210mm build volume. Bruk.gcode prints in 6h with 30g of Polypropylene (PP) filament. Tested with Formfutura PP The print profile is not provided because manual modifications of the exported print file (gcode) are required to make Bruk watertight, so I suggest printing Bruk.gcode instead of slicing the .stl How I sliced Bruk.gcode: https://www.youtube.com/watch?v=qj2Xh6ys8mk Settings (Cura):from the start to the end of the cylindrical part:layer height: 0.3mmline width: 0.6mmwall line width: 0.59mmbottom layers: 4wall line count: 1top/bottom pattern: zig zagtop/bottom line directions: [67,0,134,201]skin overlap percentage: 80%flow: 120%wal