Brummer

This Sexmachine was designed to be printed on a 200x200m printer.

one 160W (Dia:36mm) motor is responsible for the vibrations and a geared motor (Dia: 24mm) can rotate an attachment up to 120 rpm. All motors with the correct diameter can be used

A 150W 12V power supply from MeanWell (type: RS-150-12) is used as the power supply.

The regulation of the speed is provided by two speed controllers from Ebay and a 12V 250W power supply to the electronics (Type: CCM6DS)

The molds for the silicone pads still need to be designed. Unfortunately I don't have the time for that

M3 threaded rods connect the elements. They go through the entire outer skin and are screwed together at the front and back with cap nuts.

The upper bar on the Brummer, which transmits the vibrations to the body, is supported by self-cast silicone elements. The shape for this is in the STL files. Other rubber rings or similar can also be used. It is important that the upper bar is mounted softly so that the vibrations