Thingiverse

Brush Holder

by Pasquale_Fantetti_Art

65 Downloads

49 Likes

0 Makes

Go to Model

Print Speed: 50 mm/s
no support
slicer: Cura
Size: 150x90x100
Time :18h 37m

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

18 h

Post-processing

Painting

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Brush Holder need supports when printing?

No supports needed for Brush Holder — it's designed to print clean off the bed.

How long does it take to print Brush Holder ?

According to the design notes, Brush Holder takes approximately 18 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Brush Holder available in?

Brush Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Brush Holder free to download?

Yes, Brush Holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Brush Holder

Similar Models

Add to Collection