Thingiverse
BT30 Tool Holder
par b_speed
14
Téléchargements
11
Likes
0
Makes
This is what I came up with to store\hold my BT30 tool holders.
It is modular so you can start with the 3x and build off of that using the different combination of legs. I used 30% infill on the legs and 10% on the main holder using 3 perimeters. Support was only used in the pockets for the legs to mount into the body.
The O-Rings are a #217 and #216
Mcmaster Links:
#217 https://www.mcmaster.com/catalog/127/3720
#216 https://www.mcmaster.com/catalog/126/3720
It is modular so you can start with the 3x and build off of that using the different combination of legs. I used 30% infill on the legs and 10% on the main holder using 3 perimeters. Support was only used in the pockets for the legs to mount into the body.
The O-Rings are a #217 and #216
Mcmaster Links:
#217 https://www.mcmaster.com/catalog/127/3720
#216 https://www.mcmaster.com/catalog/126/3720
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
