BTT5-12864-CaseV2

Made a case for my FT-5 to hold both my 12864 LCD (RepRapDiscount Full Graphic Smart Controller) and Bigtreetech 5" Pi Touchscreen. Using it for both Octoprint and Astroprint. One at a time though. The Base might have a size issue. When I printed from the model using Fusion 360, it came out a little narrow height wise. So I modeled it a little wider. if you have an issue with it the way I made it, let me know and I'll fix it. All bolts are 3MM except for the remote SD card extender. It is 2.5MM bolts

https://a.co/d/dfMJvyc 12864 LCD
https://a.co/d/fX2pUmi Bigtreetech 5" touchscreen
https://a.co/d/bKHTpHq SD card extender
https://a.co/d/0NYtzs4 Pi Fan
https://a.co/d/5bSIv73 Pi angled connector


NOTE: Updated “BTT5-12864-CaseV2” to "BTT5-12864-CaseV2.5" corrected distance between holes on the SD Card extender.