Thingiverse
Bucket
von blecheimer
115
Downloads
110
Likes
0
Makes
This is a bucket. I made it because I can.
The bucket has an outer diameter of 137mm at the bottom and 168mm at the top. The height is 170mm. It can hold 2 liters (up to the handle holes) to 2.5 liters (up to the top).
The model is designed to be printed with a 0.4mm nozzle and a layer height of 0.3mm or less. Support is not needed. Use three walls, five bottom and five top layers. To make it really waterproof paint or spray the inside with clear coat.
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0.
You are not allowed to copy this model to other 3D printing websites without my permission.
The bucket has an outer diameter of 137mm at the bottom and 168mm at the top. The height is 170mm. It can hold 2 liters (up to the handle holes) to 2.5 liters (up to the top).
The model is designed to be printed with a 0.4mm nozzle and a layer height of 0.3mm or less. Support is not needed. Use three walls, five bottom and five top layers. To make it really waterproof paint or spray the inside with clear coat.
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0.
You are not allowed to copy this model to other 3D printing websites without my permission.
blecheimer veröffentlicht auch auf
235 zusätzliche Modelle auf 3 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
