Buddha HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.69x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.3mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #13 (1.12mm) swap to Pure Yellow At layer #21 (1.76mm) swap to White for the rest.