Buddha HueForge

by ogre56

100 Downloads

40 Likes

56 Makes

Download Model

buddha buddhameditating

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Sunlu HS Black Transmission Distance: 0.3 PLA Elegoo Rapid+ Red Transmission Distance: 4.6 PLA Sunlu HS Yellow Transmission Distance: 6.5 PLA Sunlu HS White Transmission Distance: 6.1This print uses 4 unique filaments Swap Instructions: Start with Bla