Buddha hueforge pendant

my firsgt hueforge projectintended as pendant but can also be used for a keychain 3 mm hole at the top for a ring or a pinch bail when you open the model it shows a square because image was a square but background around oval was deleted. but no worries it will print only the oval shape filament instructions:Project: boeddha oval cut.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 38.11x50mm in sizeYou may print at higher layer heights below the Base Thickness of 1.2mmThe Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #becf00 PLA BambuLab Basic Bright Green Transmission Distance: 4.2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #21 (1.76mm) swap to Magenta At layer #23 (1.92mm) swap to Bright G