Buddy Vader Hueforge

Project: 6 Thumbs up Vader.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Blue Transmission Distance: 2.7 PLA Overture Space Gray Transmission Distance: 2.1 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to Space Gray At layer #11 (0.96mm) swap to Lava Red At layer #12 (1.04mm) swap to Savannah Yellow At layer #18 (1.52mm) swap to White for the rest.