bulbasaur evolution

by whiskey_actual

3 Downloads

2 Likes

2 Makes

Download Model

hueforge pokemon green black

Project: pokemonPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x156mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.1mm and the Actual Depth is 1.5mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2This print uses 2 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: St