bulls hueforge

Project: bulls.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 135.05x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #11 (0.96mm) swap to Red At layer #16 (1.36mm) swap to Orange At layer #19 (1.6mm) swap to Jade White for the rest.pour ceux quin n ont qu un seul amspause ligne 17noir-blanc