BULMA (Dragon Ball)

Project: bulma.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 128.62x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 0.3 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Dark blue At layer #6 (0.56mm) swap to Marine Blue At layer #8 (0.72mm) swap to Pink At layer #13 (1.12mm) swap to Sakura Pink At layer #21 (1.76mm) swap to Ice Blue At layer #23 (1.92mm) swap to Jade White for the rest.