Burning Bush

Project: Burning Bush_V1_5Colors.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 108.4x162.6mm in size You may print at higher layer heights below the Base Thickness of 1.52mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm #000000 PLA Sunlu Meta Black Transmission Distance: 1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA Sunlu Meta White Transmission Distance: 8 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #21 (1.76mm) swap to Red At layer #24 (2mm) swap to Pumpkin Orange At layer #28 (2.32mm) swap to Yellow At layer #34 (2.8mm) swap to White for the rest. (If loading the 4color with a pause, at the pause swap the Black with White)