Burning Skull

Project: Burning Skull.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.17x235mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to BlueAt layer #8 (0.72mm) swap to RedAt layer #13 (1.12mm) swap to OrangeAt layer #20 (1.68mm) swap to Yellow for the rest.