Butler

巴特勒的主体虽然需要五色打印，但仍仅需使用一个AMS即可打印完成。巴特勒的主体，在向打印机发送打印配置时须将深蓝色耗材和黄色耗材设置在AMS中的同一个位置上，如下图一所示。开始打印时这个需要被共用的位置先放深蓝色的耗材。打印过程中有一次暂停，需要在暂停时将深蓝色的耗材换成黄色的耗材。巴特勒的主体和底座分开打印，打印完成后需使用胶水将两部分粘在一起。需准备深绿色、红色、金色及银色的颜料，打印完成后在图二中标记的位置涂上对应的颜色。Although the main body of the butler needs to be printed in five colors, it can still be printed with only one AMS. When sending print configurations to the printer, the dark blue and yellow filaments must be set in the same location in the AMS, just as shown in Figure 1 below. When you start printing, you need to put the dark blue filament first insiead of the yellow one in this “same locaition”.There is a pause during the printing process, and you need to replace the dark blue filament with the yellow filament during the suspension period. The body and base of the butler are printed separately, and the two parts need to be glued together after printing. Prepare dark green, red, gold and silver pigments, and apply the corresponding colors in the places marked in Figure 2 a